My Dumb Projects
Thursday, April 03, 2008
  X/1999 Shinken Swords
X is a Japanese manga and anime series dealing with superhumans battling in apocalyptic Tokyo. I was commissioned to make two of the Shinken (or Divine Sword).



Since I had to build two identical swords, I needed to make one master , then make molds and plastic resin copies. The sword is over 59" long and very thin so it would need a reinforcing core within.



I had a friend weld a 5/16" steel rod to a 3-16" x 3/4"" steel bar. I planned to make half the blade and guard cast cast copies to glue together around the steel.



I sculpted 1/2 of the guard from clay. I worked on a mirror thinking that it would give me a better view of the complete guard. I think it was too flat to make much of a difference, though.



To fabricate the ring around the star at the pommel, I inserted one PVC pipe inside another and cast resin between them.



The star was made from 1/4" square styrene rods.



The grip was lathed out of pine stock. I then sealed it with gloss black paint.



A thin rail runs down the center of the blade from the hilt. I laminated 2 layers of styrene and dremeled the characters into the surface.



I made half of the blade from 1/4" Poplar and glued it to a sheet of MDF. A resin copy of the hilt was also glued in place.



I drew a grid on the MDF to make sure the half would be symmetrical.



After I cleaned up all the flaws with putty and primer, I made a silicone mold with a plaster jacket.



The next day I slush cast two halves with plastic resin. I reinforced the resin with chopped fiberglass mat.



I used a trim router to cut a channel in each half to make room for the steel.



I mixed up a small amount of resin to glue the steel into the channel and then the two sides together.



I painted the blades with a gloss black to show any last flaws and to act as a base coat for the metallic paint.



I used a Krylon Chrome paint for the blade.



I masked off the silver and painted the hilt with a Krylon gold leaf paint. The sword was then coated with a protective top coat of Future.



I cut the lathed grip master into its components and cast them in silicone rubber.



I inserted brass tubing into the mold and cast plastic resin around them



The cast grips. Now to trim off the extra tubing and sand down the rough edges.



To make the basket guard, I glued together 4 layers of MDF. I then shaped it on the belt sander.



I used a Dremel to carve some of the surface detail into the guard.



To make the shield, I heated a piece of styrene with a heat gun and molded it to fit. I attached it with Bondo.



I used the Dremel to carve the edge scallops into the shield.



I heat formed some more styrene to fit the shield and cut two pieces of trim. After they were attached, I Dremeled the characters into the styrene.



The completed and primered Basket Guard. I made a silicone mold from this.



The cast resin basket guard.



Here are all the pieces in a quick test fit.



The grips are wrapped in a purple thread. To simulate this, I picked up some cotton twine and a box of Rit dye.



I did a quick test wind to find out how much it would take. The answer?....25 feet!



I notched the end at an angle and CA glued the end.



I coated the resin with grip with Elmer's wood glue and started winding.



The final grip.



The sword features a red hemispherical gem on either side of the hilt. I cut a disk from 1/4" red acrylic.



I used a Dremel sanding drum to shape the dome. Once it was sanded, I hit it with a propane torch to glass over the surface.



Here is the gem in place.



I inserted a bit of threaded rod into the bead between the grips. One end of the basket will attach here.



The other end of the guard attaches to either side of the hilt. I attached these with two small brass nails.



The final assembled swords. They are REALLY long (59")!







The swords in action at the 2008 SakuraCon in Seattle.

 
Comments:
Man you did it again!
You are a scratchbuilding genius!
;)
 
Holy Crap M, you are a freakin genius...
I gotta get you on some of my stuffff, arghhhh!! :) You take stuff outta yer head and make it real.....From that, any "real blade" maker (who doesnt have squat on you.) Could easily take that and mass produce it. (CYA???)
Stay with me homedog, yeah, Im a nutty inventor, but its gonna come back to you sooooooon my friend.
Major Props < no pun intended ;)**********BTW, Im designing a "REAL KNIFE", lets talk!!!! (lets see, shirts, helmet, knife......) hehe :)
 
This comment has been removed by a blog administrator.
 
you are amazing! :O
 
Omg...... that is absolutely AMAZING. I don't think I've ever seen such a perfect replica made from scratch...
 
Your costume just rocks!
 
Not my costume, but I agree!
 
Wow, those are beautiful! Your detail is gorgeous, and those swords look like they were pulled right out of the show!
 
Those things are an inch taller than me!! They're absolutely beautiful! I'm convinced! Next time I need something done for a cosplay, I'm coming to you. You're amazing at what you do.
 
Thanks! Feel free to contact me through the new site blindsquirrelprops.blogspot.com.
 
Post a Comment



<< Home
These are all the dumb things I find myself obsessed with building when I SHOULD be doing something more productive.

As a kid I built lots of plastic model kits, never knowing that one day those skills would actually be of use.

Need something built? Fill out this form for a FREE estimate

My Photo
Name:
Location: Phoenix, Arizona, United States
ARCHIVES
2005-03-27 / 2005-04-10 / 2005-05-01 / 2005-05-08 / 2005-05-15 / 2005-05-22 / 2005-06-05 / 2005-06-19 / 2005-07-03 / 2005-07-10 / 2005-07-24 / 2005-07-31 / 2005-08-07 / 2005-09-04 / 2005-10-09 / 2005-10-16 / 2005-10-23 / 2005-10-30 / 2006-01-15 / 2006-01-22 / 2006-02-05 / 2006-02-12 / 2006-02-26 / 2006-03-26 / 2006-04-30 / 2006-07-30 / 2006-08-06 / 2006-09-24 / 2006-11-12 / 2006-11-19 / 2007-01-21 / 2007-01-28 / 2007-04-22 / 2007-06-24 / 2007-07-08 / 2007-09-02 / 2007-09-09 / 2007-09-16 / 2007-11-11 / 2008-03-09 / 2008-03-30 / 2008-06-08 / 2008-06-15 / 2008-07-20 / 2008-07-27 / 2008-08-03 / 2008-08-10 / 2008-08-24 / 2008-10-26 / 2008-11-09 / 2008-11-30 / 2008-12-14 / 2009-02-15 / 2009-02-22 / 2009-04-05 / 2009-04-26 / 2009-05-10 / 2009-05-17 / 2009-05-24 / 2009-05-31 / 2009-06-21 / 2009-07-12 / 2009-07-26 / 2009-09-20 / 2009-11-01 / 2009-11-08 / 2009-12-06 / 2010-01-03 / 2010-01-17 / 2010-02-21 / 2010-02-28 /


Powered by Blogger

Stumble Upon Toolbar





Subscribe to
Posts [Atom]