Wednesday, July 13, 2005
PPSh-41: Barrel assembly
I finally found a tube the right size for the barrel. Surprisingly, the barrel for this gun is only 10.5 inches! Once I had the right tube, I could finally drill a hole through the breach block
The dummy bullet that I made fits snugly in the breach.
and the barrel fits beautifully within the shroud. It is not glued, but held in place by a screw post. ¶ 4:47 PM
I finally found a tube the right size for the barrel. Surprisingly, the barrel for this gun is only 10.5 inches! Once I had the right tube, I could finally drill a hole through the breach block
The dummy bullet that I made fits snugly in the breach.
and the barrel fits beautifully within the shroud. It is not glued, but held in place by a screw post. ¶ 4:47 PM
Comments:
<< Home
That's a lovely piece of work, I'm very impressed. First thought was how I'd go about casting it, second was how you would get it through the postal system to me.
No truly amazing..
Thanks Tony - NZWM (Russian tank fan and maker)
Post a Comment
No truly amazing..
Thanks Tony - NZWM (Russian tank fan and maker)
# posted by 
: 1:50 PM
: 1:50 PM<< Home
